BetaFPV Naked GoPro 6/7 BEC board

Features

• BEC Board is specially designed for Naked GoPro Hero which weighs about 1.5g, make your naked GoPro lighter and easier to install on your drone.
• The BEC output voltage is 5V@2A, avoid the accident of power off which is caused by the insufficient power supply for the FC board.
• Integrated GoPro stock buttons, Power/Mode Button and Record Button
• Integrated GoPro stock LED to know the status of the camera.
• Pad is available for pilot to control the GoPro recording via the radio transmitter.
• With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.

Specification

• Item: BEC Board for GoPro Hero
• Weight: 1.48g
• Output: 5V@2A
• Input Voltage: 2-4S 
• Connector: GH 1.25 3P Connector

LED Status

 Under normal operation, plug the GH1.25 connector into the GoPro Lite camera firstly, then connect with thebattery. The LED will flash once, then you should press the Power/Mode button once in a second to power on. The LED on the BEC board has the same status as the stock LED on the GoPro mainboard.

• Power On - Press the Power/Mode button once - Flash 3 times and light off
• Power Off - Press the Power/Mode button for 5 seconds - Flash 7 times and light off
• Start Record - Press the record button once - Continuously slow flash
• Stop Record - Press the record button once - Flash 3 times and light off
• Mode Switch - Press the Power/Mode button once - Check the mode on LCD Display

Includes

• 1 * BEC Board for GoPro Hero
• 1 * H1.25 Power Cable (80mm 30AWG)