F7 FCs
Racerstar AirF7 Lite + Air50 6S 50A 4in1 ESC
Multirotors → FPV Racing drones → Flight controllers → F7 FCs → FC F7 + ESC 4in1 Stacks → Racerstar AirF7 Lite + Air50 6S 50A 4in1 ESCBrand: Racerstar
Item Name: 30.5*30.5mm Racerstar AirF7 Lite 3-6S Flight Controller+Racerstar Air50 3-6S 50A 4In1 ESC FPV Stack
AirF7 Lite
MCU: STM32F722RET6 (216MHz)
IMU: MPU6000 (SPI)
OSD(AT7456E): NO
Baro(BMP280) : NO
DJIVTX: DJI HD OSD (UART6) 6P*1.0MM
UART: UART 1/2/3/4/5/6
USB:TYPE-C
BEC Output: 5V 3A & 9V 3A ( supports stable power supply for DJI HD and high-power transmission)
Input Voltage: 3-6S Lipo
Blackbox: 16MB(W25Q128)
Firmware: JHEF7DUAL
LED_Srtip: WS2812
Buzzer: BZ+ BZ-
Mounting Hole: 30.5x30.5mm, M4
Weight: 6.5g
Onboard Voltage Sensor
- Support SBUS, CRSF, IBUS, Spektrum 1024/2048, XBUS, SumD & SumH Receiver,
- Support Support 3.3V Satellite Receiver
Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM
Input Voltage: 3-6S (12-26V)
Con. Current: 55A
Mounting Hole: 30.5*30.5MM M4
Current Sensor: Yes
Weight: 12.1g
BEC: No
Features:
-Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM
-Accurate speed control, accurate signal acquisition.
-Specical EFM8BB2F16G processor.
-You can upgrade the firmware or change the configuration parameters online through the signal line.
-Comes with Current Sensor.
-Compatible with most motors on the market.
Package Included:
1x F7 Flight Controller Board
4x Anti-vibration Ball(BLUE)
1x Cable 6P*1.0mm-GH 8P*1.25MM
1 x Cable 8P*1.0mm
1* Racerstar Air50 3-6S 50A 4In1 ESC
1* 8P*1.0MM Cable
1* 1000UF/35V Filter Capacitor
1* 14AWG Red Cable
1* 14AWG Black Cable