Join to our channels: new products, coupons, best deals:
2" Quads
Geelang Ligo78X 2" 4S Insta360 Go Mount PNP
Multirotors → FPV Racing drones → RTF/ARF/PNF → 2" Quads → Geelang Ligo78X 2" 4S Gopro6/7 Mount PNP → Geelang Ligo78X 2" 4S Insta360 Go Mount PNP
Brand: GEELANG
Item Name: LIGO78X 78mm Ducted Cinewhoop Drone BNF
Wheelbase: 78mm
Size: 119x132x23mm（Camera mount not included）
Weight: 72g (Camera mount not included)
Weight: 136g (With 3S 450 Battery, 360GO thumb camera )
Flight Controller | Item Name: SH50AF4 MATEKF411 MCU: STM32F411CEU6 (100MHz, 512K Flash Memory) Sensor: MPU-6000 (SPI Connection) Built-in 5A (Each) Blheli_S 4 in 1 ESC Dshot600 Ready Built-in Betaflight OSD (SPI Control) Built-in 5V 2A BEC Built-in Voltage Detection Shop: 8MB Black Box Onboard Power Supply: 2-3S Battery Input (DC 7-12.6V) Board Size: 28.5 * 28.5mm |
Onboard 4 In 1 ESC | Onboard 4 In 1 ESC MCU Upgraded to EFM8BB21 Power Supply: 1-2S LiPo/LiPo HV (3.5V/8.7V) Default Protocol: DSHOT300 Power Input: XT30 |
Motor | Item Name: GL1202 8700KV Stator Specifications: D12 * H4 0.2mm Configu-ration: 9N12P Stator Diamter: 12mm Stator Length: 2mm Shaft Diameter: Φ1.5mm Winding Specifications: 180℃ Class Multiple oxygen-free copper Weight(g): 3.4g No.of Cells(Lipo): 2S-3S |
Frsky NON- EU XM+ Receiver Version | SBUS Receiver Frsky D8/D16 Switchable Compatible Non EU Transmitter both D8 and D16 mode Channels: 8CH / 16CH Failsafe Support No ground interference ( Transmitter and receiver 1 m from the ground): 300m Operating Voltage Range: 3.7~10V |
Compatible Flysky Receiver Version | IBUS Receiver Protocol: AFHDS-2A Channels: 14CH (AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe Support |
Compatible DSMX Receiver Version | Serial Bus Receiver Protocol: DSM2/DSMX Compatible Channels:6-9CH (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
TBS NANO Receiver Version | CRSF Protocol , Official TBS transmitter compatible Protocol: CRSF Channels: 8CH Failsafe Support Support receiver hardware rssi function No ground interference ( Transmitter and receiver 1 m from the ground): 500m |
PNP Receiver Version | Support any bus and other protocols, users can install by themselves |
5.8G VTX | Power Switching: Third Gear(25MW , 100MW , 200MW) Frequency: 40CH Smartaudio ready(Frsky EU-LBT and DSMX version not compatible) |
| Camera | GL950PRO: 1/4 COMS Sensor Horizontal: 800TVL 800x600 TV System: Ntsc 4:3 non-changeable Power Input: DC 5-12V FOV: F1.2 Colorful: 0.1Lux(F1.2,50IRE,AGC ON) Black and white: 0.01Lux(F1.2,50IRE,AGC ON) Signal to Noise Ratio > 50dB Dynamic Range >60dB Lens: m7 White Balance: Auto white balance Image: Color BLC: Stand by Video Format: NTSC Weight: 1.5g |
| Propeller | Gemfan 2023-3 Toothpick Props Material: PC Weight: 0.88g Pitch: 2.3 Inch Props Dia: 52.17mm Center Thickness: 5mm Center Hole Dia: 1.5mm 3 holes |
Battery Recommended
| Species: lipo, lipoHV Capacity: 450-550mAh |
Features:
1. Use SH-50A flight controller to support 2-3s lithium battery power supply. The integrated Betaflight OSD function keeps track of the signal of the flight voltage receiver and can observe the status in real time during flight.
2. VTX comes with Smartaudio function, you can adjust the flight control parameters through the OSD, adjust the flight control PID, and adjust the VTX frequency point parameters Completely assembled and debugged, you can fly with the remote control.
3. A more compact design is adopted for the first time, with a wheelbase of 78mm. However, passing long-term flight tests will not affect flight efficiency at all. Indoor flight has better maneuverability and playability.The FPV end adopts GL950 camera, the image quality is clear. The complex environment of flying indoors has better observation and controllability.
4. The 3s power supply and the 2-inch three-blade propeller have been tested and matched for a long time, and have obtained good operability and durability. It is recommended to use 3s 450mah battery, if you need longer space, you can add 3s550mah battery. Through continuous improvement, the problem of low efficiency of the 2-inch air duct machine was finally solved. Indoor small cross aerial photography becomes a reality. In order to better protect the outer ring,EVA sponge material is used to improve safety and reduce wind resistance. Through optimization, the performance is very good.
5. The flight controller supports Betaflight adjustment, a variety of flight modes, carefully adjusted by the original factory, suitable for novice flight practice, stable style.
6. Independent use of multiple versions of the receiver, electronic control is more stable. The flight control adopts the newer version of Betaflight 4.2, and the ESC adopts the 16.77 version. Both the two-way DSHOT mode and the gyroscope RPM filter are turned on to make the flight control more stable.
7. The weight of the whole machine is controlled at 72g, which solves the weight problem of the traditional air duct machine and is flexible in control.
8. The original factory is equipped with two sets of 360go thumb camera mounts, which can be replaced as needed.
9. The tail RGB LED flight control can be adjusted freely.
1 X GEELANG LIGO78X 2.3 Inch 78mm Wheelbase FPV Racing Drone
2 X 3D Printed 360gGO Thumb Camera Bracket Red & Blue
4 X GL1202 KV8700 Motor
8 X 2023 Propeller (4CW+4CCW)
1 X 5.8G VTX5840
1 X RGB LED
1 X GL950 Camera
1 X Screwdriver Removal Tool
2 X Battery Magic Strap
1 X High-end Paper Box
1 X USB Cable
1 X 3S 450mAh LipoHV Battery
Option 1: SH50AF4 Frsky NON-EU XM+ Receiver Version
Option 2: SH50AF4 Flysky Receiver Version
Option 3: SH50AF4 DSMX Receiver Version
Option 4: SH50AF4 TBS Crossfire NANO Receiver Version
Option 5: SH50AF4 PNP NO RX Receiver Version
Share
Prices for Geelang Ligo78X 2" 4S Insta360 Go Mount PNP in stores
Deals found: 4 ()
See also
Geelang Ligo78X 2" 4S Gopro6/7 Mount PNP
$122
Join to our channels: new products, coupons, best deals: