Join to our channels: new products, coupons, best deals:
Multirotors
Matek M8Q-CAN GPS module UAVCAN
Multirotors → GPS Modules → Matek M8Q-CAN GPS module UAVCANRecommended stores↓ Another stores
GPS M8Q-CAN, UAVCAN
AP F303 CAN node, SAM-M8Q, QMC5881L, DPS310, I2C, Uart1 & Uart3 breakout. UAVCAN protocol
Gallery
Spec.& Settings
Specifications
- ArduPilot AP_Periph F303 CAN node
- GPS SAM-M8Q (GPS, GLONASS, Galileo)
- Magnetic Compass QMC5883L
- Barometer DPS310
- UART1, Firmware update
- UART2, onboard GPS
- UART3, MSP Protocol (To be supported)
- CAN, UAVCAN Protocol
- I2C, onboard QMC5883L & DPS310
- I2C JST-GH connector, external AirSpeed sensor
- CAN bootloader LED, Blue
- Fast blinking, No communication between CAN node and Flight Controllers
- Slow blinking, Communicating between CAN node and Flight Controllers
- GPS PPS LED, Green
- blinking(1Hz) when GPS has 3D fixed
- Boot button
- Input voltage range: 4~6V
- Power consumption: 100mA
- Operating Temperatures: -20~80 °C
- 29mm*29mm*9.7mm
- 11.3g
Includes
- 1x M8Q-CAN
- 2x JST-GH-4P to JST-GH-4P 20cm silicon wire
Tips
- u-blox M8Q series has no external flash memory
- Compass Alignment(Arrow forward and flat mounting):
Ardupilot/Mission Planner: Rotation None - Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
- The scratches on ceramic antenna are the result of tuning the antenna by ublox.
- UART3 MSP Protocol is not implemented for now.
——————————————————-
Wiring and AP Parameters
CAN | I2C | |||
M8Q-CAN | Flight Controller | M8Q-CAN | I2C Airspeed sensor | |
5V | 5V | 5V or 3V3 | check AirSpeed sensor voltage spec. | |
C-H | CAN High | SCL | SCL | |
C-L | CAN Low | SDA | SDA | |
G | GND | G | GND | |
CAN_D1_PROTOCOL | 1 | |||
CAN_P1_DRIVER | 1 | |||
GPS_TYPE | 9 (UAVCAN) | ARSPD_TYPE | 8 (UAVCAN) | |
COMPASS_TYPEMASK | 0 (make sure UAVCAN Unchecked) | ARSPD_USE | 1 |
——————————————————-
Pinout & Pads
GH-4P Pin | Signal | Wires color | Pads | Signal | |
5V | 4~6V input | Red | 3V3 | onboard LDO output | |
C-H | CAN high | Yellow | 5V | 4~7V input | |
C-L | CAN low | Blue | G | GND | |
G | GND | Black | Tx1 | UART1-TX | |
Rx1 | UART1-RX | ||||
5V | 4~6V input | Red | Rs | F303 NRST | |
SCL | I2C-SCL | Yellow | C | F303 SWCLK | |
SDA | I2C-SDA | Blue | G | GND | |
G | GND | Black | D | F303 SWDIO | |
3 | onboard LDO output 3.3V | ||||
5V | 4~6V input | Red | |||
Tx3 | UART3-TX | Yellow | |||
Rx3 | UART3-RX | Blue | |||
G | GND | Black | Boot button | Bridge Boot to 3.3V |
Firmwares
AP_Periph_with_bl_f303_MATEK.hex Jul.15
STM32CubeProgrammer
https://www.st.com/en/development-tools/stm32cubeprog.html
You may download Windows version from our server en.stm32cubeprog_v2-3-0.zip
Share
Prices for Matek M8Q-CAN GPS module UAVCAN in stores
Deals found: 33 (ReadyMadeRC1, RCPapa1, Banggood1, AliExpress1)
Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
AliExpress | Stock level: 18 | $46 | 1 | $46 | ||
ReadyMadeRC | Out of stock | $50 | 1 | $50 | ||
Banggood | Out of stock | $50 | 1 | $50 | ||
RCPapa | Out of stock | $50 | + $71 | 1 | $121 |
See also
GPS Modules